Get pressing quotes

Guide

How vinyl records are made

The vinyl manufacturing process step by step: mastering, lacquer cutting, plating, test pressings, pressing and packaging, and why it takes weeks.

Every vinyl record starts as audio and ends as a pressed PVC disc. In between are several physical steps, each done by specialists. Knowing them helps you plan a release, read a quote, and understand why turnaround is measured in weeks, not days.

1. Mastering for vinyl

A mastering engineer prepares the audio for the limits of a record: bass is kept centred, harsh high frequencies are controlled, and the running order is split into sides of a sensible length. A digital master made for streaming is often too loud or too bright to cut well, so ask for a vinyl-specific master.

2. Lacquer cutting (or DMM)

A cutting engineer plays the master into a lathe that engraves the groove into a lacquer-coated aluminium disc, one lacquer per side. An alternative, Direct Metal Mastering (DMM), cuts into a copper-plated disc instead.

3. Plating (electroforming)

The lacquer is coated with silver and electroplated with nickel to make a metal negative, called the father. For larger runs, a mother (positive) and several stampers (negatives) are grown from it. The stampers are what actually press the records.

4. Test pressings

The plant presses a small number of test records. You listen for noise, skips and distortion and approve them (or not) before the full run. Allow one to three weeks for this step, including shipping.

5. Pressing

A measured puck of heated PVC (the "biscuit") is placed between the two stampers with the paper centre labels, and pressed for a few seconds under heat and hydraulic pressure, then cooled. Excess vinyl is trimmed from the edge. Coloured, marbled and splatter effects come from mixing coloured compounds in the biscuit.

6. Packaging and quality control

Records go into inner sleeves and printed jackets, are shrink-wrapped, and are boxed. Plants spot-check records from each run.

How long does it take?

The actual pressing is quick; the waiting is in the queue. Plants publish turnarounds from around four weeks to several months, plus test-pressing approval time. Check each plant's current lead time in our pressing plant directory, or request quotes and ask.

Last reviewed November 2026. All guides