Modern records come in three main sizes and two main speeds. The combination sets how much music fits on a side and how it sounds.
| Format | Typical use | Comfortable time per side |
|---|---|---|
| 7-inch, 45 rpm | Singles | about 4–6 minutes |
| 7-inch, 33⅓ rpm | EPs, longer singles | about 6–8 minutes |
| 10-inch, 45 rpm | EPs, special editions | about 8–10 minutes |
| 10-inch, 33⅓ rpm | EPs, short albums | about 12–15 minutes |
| 12-inch, 45 rpm | DJ singles, audiophile reissues | about 12–15 minutes |
| 12-inch, 33⅓ rpm | Albums (LPs) | about 18–22 minutes |
These are practical guidelines, not hard limits. Longer sides are possible, but the groove must be cut narrower and quieter, which lowers volume and bass. Mastering and cutting engineers will advise on your specific material.
Why 45 rpm sounds better
At a higher speed, more groove passes the stylus each second, so high frequencies and transients are reproduced more accurately. The trade-off is less time per side.
78 rpm
Shellac 78s were the standard before the LP. They need a turntable with a 78 setting and a suitable stylus.
Try the side length calculator to see how your own track list fits each format.
Last reviewed November 2026. All guides